最后更新日期：2026年9月27日 | 适用应用：QPLight（版本 V1.0.1）
本隐私政策由 深圳市潜派创新技术有限公司（以下简称"我们"）制定并发布，适用于我们开发并运营的移动应用程序 QPLight（以下简称"本应用"）。我们深知个人信息对您的重要性，并致力于保护您的隐私安全。
请您在使用本应用前仔细阅读并充分理解本政策。您开始使用本应用，即表示您已阅读、理解并同意本政策的全部内容。如您不同意本政策的任何内容，请停止使用本应用。
android.permission.INTERNET），在操作系统层面即不具备任何联网能力我们不收集您通过本应用主动提供的任何个人信息。本应用无需注册、无需登录、无需创建账户，不会要求您提供姓名、手机号码、电子邮箱、身份证件号码等任何信息。
本应用不会收集、存储或传输下列任何信息：
ANDROID_ID，iOS 系统为 identifierForVendor），
其唯一用途是在您的设备本地生成固定的灯具控制地址（RF297L 协议地址），以确保同一台手机对同一组灯具的控制地址保持稳定。
该信息仅在本机进行计算与存储，不会上传至任何服务器，不会用于识别您的真实身份，也不会用于追踪或用户画像。
为实现灯光控制这一核心功能，本应用需要申请下列权限。所有权限的用途如下表所示，均不涉及个人信息的收集与上传：
| 权限名称 | 用途说明 | 是否上传 |
|---|---|---|
蓝牙扫描BLUETOOTH_SCAN |
搜索并发现您附近的智能照明设备。本应用已声明 neverForLocation 标志，不会通过蓝牙扫描结果推断或获取您的地理位置。 |
否 |
蓝牙连接BLUETOOTH_CONNECT |
与您的智能照明设备建立蓝牙通信，用于读取设备状态及下发控制指令。 | 否 |
蓝牙广播BLUETOOTH_ADVERTISE |
以 BLE 广播（Advertising）方式向照明设备发送控制信号。这是本应用与灯具通信的主要方式。 | 否 |
蓝牙BLUETOOTHBLUETOOTH_ADMIN |
仅适用于 Android 11 及以下系统，用于实现上述蓝牙通信功能。 | 否 |
位置信息ACCESS_FINE_LOCATIONACCESS_COARSE_LOCATION |
仅为满足 Android 11 及以下系统对蓝牙扫描的技术性要求而申请（该系统版本下，扫描蓝牙设备必须持有位置权限，属操作系统层面的强制要求）。
本应用不会读取、收集、存储或上传您的真实地理位置信息。 本应用已为该权限声明 maxSdkVersion="30"，即仅在 Android 11 及以下系统中申请。
在 Android 12 及以上系统中，本应用不会向您申请该权限。 |
否 |
此外，本应用声明依赖蓝牙低功耗硬件能力（android.hardware.bluetooth_le），这是运行本应用的必要条件。
您在本应用中设置的灯光参数（包括颜色、亮度、色温、灯具分组名称、定时设置、语言偏好等）默认保存在您设备的本地存储中，仅用于恢复您的使用偏好。这些数据不会离开您的设备，卸载本应用即会一并删除。
本应用对上述权限与本地数据的使用，仅限于实现下列功能：
我们不会将任何信息用于广告投放、用户画像、行为分析或任何与上述功能无关的用途。
本应用产生的全部数据均存储在您的设备本地，包括：
本应用不具备联网能力，因此：
本应用与灯具之间的通信仅通过蓝牙低功耗（BLE）广播完成，属于短距离本地射频通信，不经过互联网，也不经过任何中间服务器。
本应用不进行任何数据传输与云端存储，您的信息不存在因网络传输或服务器存储而被泄露、篡改或丢失的风险。存储在设备本地的数据受操作系统自身的应用沙箱机制保护，其他应用无法读取。
本应用未集成任何第三方数据统计、用户行为分析、消息推送、广告投放或崩溃收集服务。本应用不含任何广告。
本应用在开发中使用了下列开源软件组件，仅用于实现核心功能，均不涉及个人信息的收集与上传：
flutter_blue_plus —— 提供蓝牙通信能力permission_handler —— 申请系统运行所需权限shared_preferences —— 在本地保存应用偏好设置device_info_plus —— 读取设备基础标识，用于在本地生成固定的灯具控制地址本应用为智能照明设备控制工具，不以未成年人为服务对象，也不会主动收集未成年人的个人信息。若您是未成年人，请在监护人的指导下使用本应用。若监护人发现在未获同意的情况下收集了未成年人信息（本应用实际上不收集任何个人信息），请联系我们，我们将及时处理。
您对您的信息享有下列权利：
若您拒绝授予某项权限，本应用不会退出，您仍可使用不依赖该权限的其他功能。
我们可能会适时更新本隐私政策。若本政策发生重大变更（例如本应用新增联网功能、新增数据处理行为），我们将通过应用内提示或本页面公告的方式通知您，并更新本页面的"最后更新日期"。
我们建议您定期查阅本政策以了解最新内容。
如您对本隐私政策或本应用的个人信息处理方式有任何疑问、意见或投诉，请通过以下方式联系我们：
本政策自 2026年9月27日 起生效。
Last updated: September 27, 2026 | App: QPLight (V1.0.1)
This Privacy Policy is issued by Shenzhen Qianpai Innovation Technology Co., Ltd. ("we," "our," or "us") and applies to our mobile application QPLight (the "App"). We are committed to protecting your privacy.
Please read this policy carefully before using the App. By using the App, you acknowledge that you have read, understood, and agreed to this policy. If you do not agree with any part of it, please stop using the App.
android.permission.INTERNET), and therefore has no network capability at the operating system levelWe do NOT collect any personal information you voluntarily provide through the App. The App requires no registration, no login, and no account creation. It never asks for your name, phone number, email address, ID number, or any similar information.
The App does NOT collect, store, or transmit any of the following:
ANDROID_ID; iOS: identifierForVendor)
for the sole purpose of generating a stable light-control address (RF297L protocol address) locally on your device,
ensuring that the same phone keeps a consistent control address for the same set of lights.
This information is computed and stored only on your device. It is never uploaded to any server, never used to identify you,
and never used for tracking or profiling.
To deliver the core lighting-control functionality, the App requests the following permissions. All are used solely as described below and none involve collection or upload of personal information:
| Permission | Purpose | Uploaded? |
|---|---|---|
Bluetooth ScanBLUETOOTH_SCAN |
To discover nearby smart lighting devices. The App declares neverForLocation; it does NOT infer or obtain your location from scan results. |
No |
Bluetooth ConnectBLUETOOTH_CONNECT |
To establish a Bluetooth connection with your lighting devices for reading status and sending control commands. | No |
Bluetooth AdvertiseBLUETOOTH_ADVERTISE |
To send control signals to lighting devices via BLE advertising. This is the App's primary communication method. | No |
BluetoothBLUETOOTHBLUETOOTH_ADMIN |
Applies only to Android 11 and below, for the Bluetooth functions described above. | No |
LocationACCESS_FINE_LOCATIONACCESS_COARSE_LOCATION |
Requested solely to satisfy an Android technical requirement for Bluetooth scanning on Android 11 and below
(on those versions, scanning for Bluetooth devices requires location permission — an operating-system-level constraint).
The App does NOT read, collect, store, or upload your real geographic location. The App declares maxSdkVersion="30" for this permission, so it is requested only on Android 11 and below.
On Android 12 and above, the App does not request this permission at all. |
No |
The App also declares a dependency on Bluetooth Low Energy hardware (android.hardware.bluetooth_le), which is required to run the App.
Lighting parameters you configure (color, brightness, color temperature, group names, timers, language preference) are stored locally on your device solely to restore your preferences. This data never leaves your device and is deleted when you uninstall the App.
Use of the permissions and local data described above is limited strictly to the following:
We do NOT use any information for advertising, profiling, behavioral analysis, or any purpose unrelated to the functions above.
All data generated by the App is stored locally on your device, including:
Because the App has no network capability, it:
Communication between the App and lighting devices occurs exclusively via Bluetooth Low Energy (BLE) advertising — a short-range local radio link that does not traverse the internet or any intermediary server.
Since the App performs no data transmission and no cloud storage, your information is not exposed to risks associated with network transmission or server-side storage. Data stored locally is protected by the operating system's application sandbox, which prevents other apps from reading it.
The App does NOT integrate any third-party analytics, behavioral tracking, push notification, advertising, or crash-reporting services. The App contains no advertising.
The App uses the following open-source components solely for core functionality. None involve collection or upload of personal information:
flutter_blue_plus — Bluetooth communication capabilitypermission_handler — requesting permissions required for operationshared_preferences — storing app preferences locallydevice_info_plus — reading a basic device identifier to generate a stable light-control address locallyThe App is a smart lighting control tool and is not directed at children. It does not knowingly collect personal information from children. Children should use the App under the guidance of a parent or guardian. If a guardian believes that a child's information has been collected without consent (the App in fact collects no personal information), please contact us and we will address it promptly.
You have the following rights regarding your information:
If you decline a permission, the App will not exit; you may still use features that do not depend on it.
We may update this Privacy Policy from time to time. If we make material changes (for example, adding network functionality or new data-processing behavior), we will notify you via an in-app notice or a notice on this page, and update the "Last updated" date above.
We encourage you to review this policy periodically.
If you have any questions, concerns, or complaints about this Privacy Policy or how the App handles personal information, please contact us:
This policy takes effect on September 27, 2026.